Allen Wilson from Texas
"So far, I am VERY happy with the quality of this product!"
Allen wrote a full length review about the GTS Model. To read the full review, please click on the following link and see it for yourself.
http://www.nagtroc.org/forums/index.php?showtopic=59581
GTRSIMULATOR.COM (GTS Model) - Assembly Instructions - Written by Allen Wilson
Tools Required:
10mm socket or wrench
12mm socket or wrench
Allen Wrench/Hex Key set
Optional: (a friend or willing spouse if you have one)
- Nuts and Bolts
- Main Frame Pieces including seat slider bracket
STEP 1 - Connect seat base (#1) to footrest/pedal base (#2)
STEP 2 - Install square bracket (#4) for seat installation
STEP 3 - Slide bracket down/up in order to bolt slider bracket to the bottom of GTR seat. (Repeat on opposite side of seat bottom)
STEP 4 - Attach GTR seat to the top of square seat bracket (#4) - Make sure slider bracket bolts are parrallel. This makes installation to the square bracket (#4) a lot easier. A friend/assistant may also be required to help hold the seat in place while the slider bracket bolts are lined up with the pre-drilled holes.
STEP 5 - Attach steering column (#3) to footrest/pedal base (#2) with the supplied hardware.
STEP 6 - Attach the steering wheel adapter (#5) - NOTE: this piece may need further adjustment based on which model wheel/pedal coombination you are using.
STEP 7 - (not shown) If needed/required, attach optional shifter holder (#6) to the provided spaces between seatbase (#1) & footrest/pedal base (#2).
